Updated Nov 18, 2026· 7 min read

Key takeaways

  • A fail-secure electric strike is the right choice for most exterior and perimeter doors where the door must stay locked during a power outage, while a…

A fail-secure electric strike is the right choice for most exterior and perimeter doors where the door must stay locked during a power outage, while a fail-safe electric strike fits interior doors tied to a fire-alarm release system where the door must unlock automatically if power is cut. Electric strikes replace a standard door strike plate with an electrically controlled version, letting an access-control system, intercom, or buzzer release the door remotely without a motorized lock on the door itself.

What an Electric Strike Does and How It Differs from Other Access Hardware

An electric strike is a relatively simple device: it sits in the door frame in place of the standard fixed strike plate, and the keeper (the part that catches the latch) either pivots or releases electronically when voltage is applied or removed, depending on the strike’s fail mode. The door’s existing latch and lockset stay mechanically unchanged, which is why electric strikes are a popular retrofit option, since they usually don’t require replacing the whole lock, only the frame-side strike component and the wiring needed to power it.

This differs from an electric deadbolt or a maglock (magnetic lock), which control the door at the lock or frame in a different way. A maglock holds the door shut with magnetic force between a plate on the door and an electromagnet on the frame, and nearly always needs to be paired with fire and life-safety release devices since it provides no mechanical latch at all. Electric strikes, by contrast, work with the building’s existing mechanical latch, which is one reason code officials and locksmiths often consider them simpler to integrate into standard commercial door hardware.

Fail-Safe vs. Fail-Secure: The Most Important Decision

This single specification affects both security and life-safety code compliance more than any other feature. A fail-secure strike stays locked when power is lost and only unlocks when power is applied, which is the typical choice for exterior doors, server rooms, or any space where unauthorized access during an outage is the bigger risk than being unable to exit. A fail-safe strike does the opposite: it unlocks when power is lost, which is generally required on doors in an egress path that are also tied into a fire alarm or life-safety release system, so occupants can exit freely if the building loses power during an emergency.

Local building and fire codes typically dictate which fail mode is required for a given door, particularly for doors along a required means of egress, so buyers should confirm the applicable code requirement with a locksmith, security integrator, or the local fire marshal rather than choosing based on preference alone. Some strike models allow the fail mode to be field-selected or reversed, which adds flexibility if the use case isn’t finalized at purchase time, though not every model offers this.

Voltage, Current, and Door Frame Compatibility

Electric strikes are commonly available in multiple voltage options, typically including 12VDC and 24VDC, and some models support both AC and DC input or a selectable voltage range. The strike must be matched to the voltage and current output of the access-control panel, power supply, or buzzer system it connects to; using a mismatched voltage can cause the strike to operate unreliably, overheat, or fail prematurely. The maker’s current draw specification should also be checked against the power supply’s total capacity when multiple doors or devices share one supply.

Frame and door prep compatibility is the other major fit consideration. Electric strikes are generally manufactured to match a specific ANSI strike cutout size or a particular door closer/frame profile, and mismatched cutout dimensions are a common cause of installation problems on retrofits. Buyers replacing an existing mechanical strike should measure the current cutout and faceplate dimensions, or match the strike model to the lockset’s specified strike compatibility list, before ordering.

At a Glance: Electric Strike Types

Type Best for Typical stated specs Limits
Fail-secure Exterior doors, secure rooms, perimeter access control Locked on power loss, 12/24V options, standard ANSI cutout Not suitable for life-safety egress doors requiring fail-safe release
Fail-safe Interior doors tied to fire alarm/life-safety release Unlocked on power loss, 12/24V options Less secure during outages; needs backup security measures
Field-selectable (reversible) Installers unsure of final code requirement at install time Switchable fail-safe/fail-secure operation Added cost over single-mode strikes
Latch monitoring / door position models Access-control systems needing door status feedback Built-in switch reporting latch or door state Requires compatible control panel input

Pick X If…

Situation Recommended type
Exterior or perimeter door needing security during outages Fail-secure strike
Door on a required means of egress with fire-alarm tie-in Fail-safe strike, per local code requirement
Code requirement not yet finalized at install Field-selectable (reversible) strike
Access-control system needs door/latch status reporting Strike with built-in latch monitoring
Retrofitting an existing mechanical strike cutout Match exact ANSI cutout/faceplate size to avoid frame modification

Installation and Wiring Notes

Electric strikes require low-voltage wiring routed from a power supply or access-control panel through the door frame, which on existing buildings often means fishing wire through the frame or using a surface raceway if internal routing isn’t feasible. Many installers pair electric strikes with a door position switch and request-to-exit hardware as part of a complete access-control door package, though the strike itself is only one part of that system. Following the hardware manufacturer’s installation template for the cutout and the access-control panel manufacturer’s wiring diagram is important, since incorrect wiring polarity or voltage can damage the strike’s internal solenoid.

Buyers should also confirm the strike is rated for the door’s fire rating if the door itself is a fire-rated assembly, since not all electric strikes carry a fire-door listing, and installing a non-listed strike on a rated fire door can violate code and void the door’s rating.

Alternatives to Consider

An electric deadbolt or electrified mortise lock is a stronger alternative for doors needing a higher security grade, since it replaces the entire lock mechanism rather than just the frame-side strike, though it typically costs more and requires more extensive door prep. A magnetic lock (maglock) is worth considering for glass doors or frames unsuitable for a strike cutout, provided the installer properly integrates required fire-alarm release and emergency egress hardware. For very simple, low-security buzz-in applications, such as a single office door tied to an intercom, a basic electric strike paired with a doorbell-style buzzer system remains the simplest and most common solution and generally doesn’t need the added complexity of a full access-control panel.

Frequently Asked Questions

What’s the practical difference between fail-safe and fail-secure in daily use?

In daily operation with power present, both types function identically from a user’s perspective, releasing the door when triggered by the access-control system. The difference only becomes apparent during a power outage: a fail-secure door stays locked, while a fail-safe door unlocks, which is why the choice is driven by security needs versus life-safety egress requirements rather than everyday convenience.

Can I install an electric strike myself, or do I need a locksmith?

Buyers comfortable with basic electrical wiring and door hardware installation sometimes install electric strikes themselves, particularly on simple buzzer-release setups. However, doors involved in fire-rated assemblies, egress paths, or complex access-control systems are generally better handled by a licensed locksmith or security integrator familiar with local code requirements.

Will an electric strike work with my existing deadbolt?

Standard electric strikes are designed to work with a latch bolt, not a deadbolt, since the strike’s moving keeper needs to release a spring latch rather than a solid deadbolt throw. Doors secured primarily by a deadbolt typically need an electrified mortise lock or a dedicated electric deadbolt rather than a conventional electric strike.

What happens to an electric strike during a power outage if it’s fail-secure?

A fail-secure strike remains locked when power is lost, meaning the door cannot be released electronically until power is restored, though the door can usually still be opened with a mechanical key from the appropriate side if the lockset includes that feature. Buildings relying on fail-secure strikes on egress doors should have an approved alternate means of egress per local fire code.

How do I know which ANSI cutout size my door frame needs?

The existing mechanical strike’s faceplate and cutout dimensions, or the lockset manufacturer’s published strike compatibility chart, are the most reliable ways to determine the correct size. When in doubt, a locksmith can measure the frame and lockset to confirm the correct electric strike model before ordering, avoiding a frame modification.

Do electric strikes need ongoing maintenance?

Following the manufacturer’s manual, periodic checks of the keeper’s movement, wiring connections, and voltage supply help catch early signs of wear, such as a sluggish or noisy release, before they lead to a failure. Dust, moisture, or frequent heavy use can accelerate wear on the internal solenoid, so higher-traffic doors may need more frequent inspection than low-traffic interior doors.

K
Kissmyaster Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.