Updated Nov 19, 2026· 5 min read

Key takeaways

  • Our Butom RC12YC spark plug review covers fitment, thread size, heat range and gap specs, plus how to check compatibility before replacing a Champion plug.

A spark plug is a small part with an outsized job. In a lawn mower, generator, or pressure washer, it has to fire thousands of times an hour in heat, vibration, and dust, and when it fails the engine simply will not start. The Butom RC12YC is an aftermarket replacement for the Champion RC12YC, one of the most common plugs in Briggs and Stratton small engines. It is sold as a direct swap for engines that call for the Champion part, including models covered by Briggs and Stratton part number 491055S.

This review covers what the RC12YC specification actually means, which engines it fits, and how to confirm compatibility before ordering. The focus is on the part itself rather than the brand name on the box, since a replacement plug is only as good as its match to the engine it serves.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

The Butom RC12YC is an aftermarket spark plug that replaces the Champion RC12YC in Briggs and Stratton small engines, including those covered by part number 491055S. It follows the RC12YC specification: 14 mm thread, 19 mm reach, 16 mm hex, copper core electrode, and a resistor design. Confirm the engine model and the existing plug number before ordering, since a wrong heat range can damage an engine.

Key Specs

Spec Detail
Brand Butom
Replaces Champion RC12YC
Cross-reference Briggs and Stratton 491055S, 496018S, 696202, 699496
Thread diameter 14 mm
Thread reach 19 mm (3/4 inch)
Hex size 16 mm (5/8 inch)
Seat type Flat
Tip configuration Projected
Terminal type Removable
Electrode material Copper core with nickel alloy
Resistor Yes
Heat range 12 (medium)
Gap 0.032 to 0.038 inches
Application 4-cycle small engines: lawn mowers, generators, pressure washers, chainsaws

Check price on Amazon

Who It’s For

This plug is for owners of small-engine equipment that specifies a Champion RC12YC. That covers a wide range of Briggs and Stratton powered mowers, generators, and pressure washers, plus Craftsman and other brands that use the same engine family. If the existing plug pulled from the engine reads RC12YC, or the engine manual lists Briggs and Stratton part number 491055S, this is the correct replacement type.

It also suits anyone doing routine seasonal maintenance. A fresh plug is one of the cheapest ways to cure hard starting, rough idling, and poor fuel economy in a small engine, and replacing it once a season is standard practice for equipment that sits unused for months. The copper core electrode and resistor design match the original specification, so there is no need to adjust ignition timing or change the gap beyond the standard range.

Who Should Skip It

Skip this plug if the engine calls for a different heat range. The RC12YC is a medium heat range plug, and fitting a hotter or colder plug than specified can cause fouling or pre-ignition. The RC14YC, for example, looks nearly identical but runs hotter, and the two are not interchangeable despite the similar part numbers. Always match the exact plug number in the engine manual.

Also skip it if the existing plug is a different thread size or reach. A plug that is too long can contact the piston, and one that is too short leaves part of the threaded hole exposed to combustion deposits. If the manual or the old plug shows a different number, order that number instead. Finally, anyone unsure about their engine model should check the engine identification plate or the manual first rather than guessing from the equipment brand alone.

How It Compares With Typical Alternatives

The most direct alternative is the genuine Champion RC12YC itself. As an original-equipment part it carries the brand name and the longest track record, and for many owners that is reason enough to choose it. Aftermarket replacements like the Butom exist to offer the same specification at a lower cost, and when the dimensions, heat range, and electrode material match, they perform the same function in the engine.

Other brands offer cross-referenced equivalents as well. NGK lists the BKR5E, BKR5E-11, BCPR5ES, and BCPR6ES as compatible replacements, and Autolite lists the 3924 among others. These are all built to the same basic dimensions, and the practical differences come down to electrode material and price. Copper core plugs like the RC12YC are the standard for small engines: they conduct heat well and wear at a predictable rate. Platinum or iridium plugs last longer in automotive use, but they are rarely specified for small air-cooled engines and cost more without a clear benefit there.

Compared with a universal or multi-fit plug, the RC12YC is the safer choice. Universal plugs rely on the buyer to verify fit, while a direct cross-reference to a known part number removes that guesswork. The key step is verifying the cross-reference against the engine manual rather than trusting a listing title alone.

FAQ

How do I know this plug fits my engine?

Check the engine manual or the plug currently installed. If either one lists Champion RC12YC or Briggs and Stratton part number 491055S, this plug is the correct replacement type. The engine identification plate, usually stamped on the blower housing or valve cover, gives the exact engine model to cross-check.

What gap should I set?

The RC12YC specification calls for a gap of 0.032 to 0.038 inches. Check the gap with a feeler gauge before installing, and adjust it gently if needed. The engine manual may specify a narrower range within that span, so follow the manual when it differs.

Can I use an RC14YC instead of an RC12YC?

No. The RC14YC runs hotter than the RC12YC, and fitting the wrong heat range can cause fouling or pre-ignition and may damage the engine. The two plugs look similar, but the heat range is different. Always use the exact plug number the engine specifies.

How often should a small-engine spark plug be replaced?

Once a season is a common rule for equipment that runs regularly, and at least once a year for equipment that sits unused for months. A plug that is fouled, eroded, or cracked should be replaced immediately, since it can cause hard starting and rough running.

Final Verdict

The Butom RC12YC is a straightforward aftermarket replacement for one of the most common small-engine spark plugs in use. Its specification matches the Champion RC12YC it replaces: 14 mm thread, 19 mm reach, 16 mm hex, copper core electrode, resistor design, and a medium heat range. For Briggs and Stratton engines that call for part number 491055S, it is the right type of plug at a lower cost than the original-equipment part. The one caution is verification. The assigned ASIN could not be independently confirmed by searching the ASIN code itself, so confirm the listing matches this exact part before ordering, and always cross-check the plug number against the engine manual. Get that right, and this is a sensible maintenance buy.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Butom RC12YC Spark Plug Review: Small Engine ReplacementCheck price on Amazon