Updated Nov 17, 2026· 7 min read

Key takeaways

  • Chuck size: a 1/2 in. chuck takes larger bits and is common on drill/drivers in this class. A 3/8 in. chuck is smaller; check the specs.
  • Battery capacity: amp-hours (Ah) indicate run time. A 1.5Ah pack is fine for light work; heavier jobs favor 2.0Ah or larger.
  • Impact driver bits: impact drivers take 1/4 in. hex bits. Standard drill bits with round shanks do not fit a hex chuck unless they have hex shanks or an adapter.
  • Storage: a soft bag saves space but offers less protection than a hard case.
  • Warranty: compare terms, since listings quote different periods.

Under $150, the realistic choice is a small cordless starter kit: a two-tool drill/driver plus impact driver set such as the Ryobi ONE+ PCL1200K2 or the Craftsman V20 CMCK200C2 for someone who will keep adding tools, or a single drill project kit such as the Black+Decker BDCD120VA for a renter who mainly hangs shelves and assembles furniture. Larger kits with a saw, light and extra tools are listed by the makers, but they typically move into a higher tier than this cap, so be wary of any listing that promises a big multi-tool bundle at this level.

Our top picks

As an Amazon Associate we earn from qualifying purchases at no extra cost to you.

What a $150 budget really buys

A power tool set is only a good deal if the battery platform keeps working for you. Most budget kits include a drill/driver, sometimes an impact driver, one or two small batteries, a charger and a bag. The battery is the part you are really committing to: Ryobi ONE+, Black+Decker 20V MAX and Craftsman V20 each use their own battery type, and a tool bought later has to match. Pick the platform whose bare tools (saws, sanders, lights, a vacuum) you might add next.

At a glance

Kit Best for Key stated specs Limits
Ryobi 18V ONE+ 2-Tool Combo Kit (PCL1200K2) Growing into a full platform The maker lists a 1/2 in. drill/driver, 1/4 in. impact driver, two 1.5Ah lithium-ion batteries, an 18V charger and a bag Small batteries; listings show varying kit codes and promotional pricing, so confirm which kit you are buying
Craftsman V20 2-Tool Combo Kit (CMCK200C2) Drilling and driving with an impact driver for screws Retailer listings describe a CMCD700 1/2 in. drill/driver with up to 1,500 RPM, a 1/4 in. impact driver with 1,460 in-lbs of torque (one listing says 1,450), two batteries, charger, bag, LED lights Battery size varies between listings (roughly 1.3Ah to 2.0Ah is quoted); a 3-year limited warranty is quoted by one retailer
Black+Decker 20V MAX Drill and Project Kit (BDCD120VA) Light household tasks and furniture assembly The maker lists a 35-piece kit with the LD120 drill/driver, battery, charger, 24-position clutch, keyless chuck, variable-speed trigger; about 4.9 lb One drill only; some retailer pages state 11 clutch positions, so listings differ; the maker’s page says 24

Ryobi ONE+ PCL1200K2: the platform play

Ryobi’s site lists several ONE+ combo kits, from a two-tool kit up to 12 tools. The two-tool PCL1200K2 includes a 1/2 in. drill/driver (the maker lists a 24-position clutch and up to 515 in-lbs of torque), a 1/4 in. impact driver (up to 1,800 in-lbs listed), two 1.5Ah batteries, a charger and a bag. This is the structure most beginners should look for: a drill for holes and general driving, plus an impact driver, which is more comfortable for long screws and decking and is described by reviewers as easier on the wrist for repeated fastening.

The bigger kits are where it gets confusing. Ryobi’s site also shows larger kits that add a circular saw, a light, a reciprocating saw and a multi-tool. Those larger kits sit in a higher tier than the two-tool kit, so for a cap of $150 the two-tool kit is the one to target. Listings vary and promotions come and go, so compare the contents carefully: kit code, battery count and amp-hour rating.

Ryobi also sells brushless “HP” two-tool kits. Brushless motors are generally described as more efficient and longer-lasting than brushed ones, but those kits are in a higher tier than the basic set and are not the focus of this budget guide.

Craftsman V20 CMCK200C2: a straightforward two-tool kit

The Craftsman V20 2-tool kit pairs a drill/driver with an impact driver. Retailer listings describe a 280 UWO motor, a two-speed gearbox with a top speed of 1,500 RPM and a low range listed as 0 to 350 or 0 to 400 RPM depending on the source. The impact driver is listed at 1,460 in-lbs of torque, 2,800 RPM and 3,100 BPM. Both tools are described as having an LED light. Two batteries and a charger are included, which matters because a single-battery kit leaves you waiting when it dies mid-project.

Treat these as retailer listing figures. Battery capacity is quoted inconsistently across listings, roughly 1.3Ah to 2.0Ah, so check the pack label before buying. Larger Craftsman V20 kits that add a circular saw and a task light exist, but they sit in a higher tier than this cap in most listings. If you want the saw, expect to move beyond the budget.

Black+Decker BDCD120VA: the lightest-duty option

Black+Decker’s page lists the BDCD120VA as a 35-piece 20 volt drill/driver project kit with a 24-position clutch, a variable-speed trigger and a keyless chuck. Measured dimensions are about 13.3 in. long and 8.8 in. high, with a weight near 4.9 lb and 30 Wh of battery energy. The maker notes that the 20V figure is the maximum initial voltage without load; nominal voltage is 18V. A retailer page lists 650 RPM maximum, and some pages state 11 clutch positions and 115 in-lbs of torque, which conflicts with the maker’s 24-position figure. Rely on the maker’s page and the manual.

This kit suits hanging pictures, assembling flat-pack furniture, and light fixing. It is not an all-day framing tool: with one battery, you will recharge between jobs. Black+Decker also offers a related kit that pairs the same drill with a 100-piece accessory set, which is useful if you have no bits at all.

Fit, size and compatibility notes

  • Chuck size: a 1/2 in. chuck takes larger bits and is common on drill/drivers in this class. A 3/8 in. chuck is smaller; check the specs.
  • Battery capacity: amp-hours (Ah) indicate run time. A 1.5Ah pack is fine for light work; heavier jobs favor 2.0Ah or larger.
  • Impact driver bits: impact drivers take 1/4 in. hex bits. Standard drill bits with round shanks do not fit a hex chuck unless they have hex shanks or an adapter.
  • Storage: a soft bag saves space but offers less protection than a hard case.
  • Warranty: compare terms, since listings quote different periods.

Safety and care

Wear eye protection when drilling or driving, and use hearing protection with impact drivers and saws. Secure the workpiece with clamps instead of holding it with a hand. Remove the battery before changing bits or accessories. Use only the charger supplied for the battery platform. Do not charge on a flammable surface, and stop using any battery that is swollen, hot or damaged. Follow the manufacturer’s manual, particularly for any saw. Before drilling into walls, check for hidden wiring and pipes, and call a licensed electrician if you are unsure.

Pick X if…

Pick this If you…
Ryobi PCL1200K2 expect to add tools such as lights, saws or a vacuum on the same battery later
Craftsman CMCK200C2 want a two-tool kit with an impact driver and two batteries as the main feature
Black+Decker BDCD120VA only need a basic drill and a bundle of bits for occasional household jobs
A larger kit with a saw need the extra tools now and can step above the $150 cap

Alternatives

  • Bare tools plus one starter battery: buy a drill/driver and a battery and add other bare tools over time. It spreads cost and avoids tools you will not use.
  • Manual toolkit plus a drill: a quality screwdriver set, hammer and tape, plus a single drill, covers much of what a home needs.
  • Tool rental or library: for one-off jobs needing a saw or hammer drill, renting avoids buying a tool for a single use.

Frequently Asked Questions

Do I need an impact driver as well as a drill?

Not always. A drill/driver handles holes and light screwdriving. An impact driver delivers rapid rotational hits that help with long screws and stubborn fasteners, and reviewers report it is easier on the wrist. If you build decks or assemble lots of furniture, a two-tool kit is a good fit.

Is a larger kit with a saw worth it at this budget?

Makers list larger kits with circular saws and lights, but they usually cost more than this cap and often come with one small battery. For $150, two good tools and two batteries serve most people better than six tools sharing one pack.

Does the battery platform matter?

Yes. Ryobi ONE+, Craftsman V20 and Black+Decker 20V MAX use different batteries and chargers. Choose the platform with the extra tools you might want.

What does Ah mean on a battery?

Ah is amp-hours, a measure of capacity. A higher number generally runs longer between charges, but the pack is also heavier and more costly. Listings differ for some kits, so check the pack rating on the product page.

Can I use these tools for drilling into masonry?

These kits are aimed at wood, metal and drywall work. Masonry normally needs a hammer drill and masonry bits. Check the tool’s manual before attempting it.

How should I care for the batteries?

Store them in a cool, dry place and charge them with the supplied charger. Do not leave them in a hot car, and stop using any pack that is damaged or swollen, following the maker’s manual.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Power Tool Set under $150: Picks and…Check price on Amazon