Key takeaways
- Before cutting into walls, floors or ceilings, consider hidden wiring, water pipes and gas lines. If there is any doubt, stop and call a licensed electrician or plumber.
- Rest the shoe firmly against the material before pulling the trigger to limit kickback and vibration, and read the manual’s kickback and blade guidance.
- Wear eye and hearing protection, a dust mask where needed and gloves suited to the job. Metal cutting sends hot sparks and chips.
- Do not remove the blade or adjust the shoe with the battery installed. Cut away from the body and keep the blade clear of cords and hoses.
- Follow the manual for battery charging and storage.
For most households, a compact brushless reciprocating saw from a value platform such as Ryobi ONE+ HP covers pruning, demolition and light plumbing cuts, while a SKIL kit suits buyers who need the saw, battery and charger in one box under $150. Full-size brushless saws from the pro brands tend to sit at or above this cap once a battery is added, so the realistic choices are the value platforms, and the honest trade-off is stroke length and durability versus entry cost.
Our top picks
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
At a glance
| Model | Motor | Stated stroke and speed | In the box | Best for |
|---|---|---|---|---|
| Ryobi ONE+ HP PBLRS01B | Brushless | 0-3,200 SPM, 1-1/4 in. stroke | Tool only | Existing Ryobi owners wanting a full-size saw |
| Ryobi ONE+ HP Compact PSBRS01B | Brushless | 0-3,000 SPM, 5/8 in. stroke | Tool and a 6 in. wood blade | One-handed pruning and light remodel cuts |
| SKIL PWR CORE 20 RS582902 | Brushed | Up to 3,000 SPM, 1 in. stroke; about 4.6 lb | Saw, 2.0 Ah battery, charger, wood blade | Buyers who need a complete kit |
| SKIL PWR CORE 20 RS5884-1A | Brushless | 1-1/8 in. stroke per most sources (a few listings say 1 in.) | Saw, 4.0 Ah battery, PWR JUMP charger | Heavier use; may sit above the cap, listings differ |
These are maker-listed or retailer-listed figures, and listings differ in places. The Craftsman V20 CMCS300B, a brushed bare tool, is a lower-cost alternative covered below.
What a reciprocating saw is for
A reciprocating saw cuts with a push-pull blade action and is built for rough work: cutting through nails in lumber during demolition, trimming pipe, cutting out old window frames, pruning branches and cutting metal studs. It is not a precision tool. For a clean finish cut in wood, a jigsaw, circular saw or handsaw is better. What matters is the blade fitted, how securely the saw is held against the work, and the stroke length, because a longer stroke clears chips faster and cuts through thicker material more quickly.
The picks in detail
Ryobi ONE+ HP full-size (PBLRS01B)
The maker lists 0-3,200 strokes per minute with a 1-1/4 inch stroke. It is a brushless model in the ONE+ HP line and is sold as a bare tool. Because the battery platform is Ryobi’s 18V ONE+ system, the saw is a natural add-on for anyone who already owns a Ryobi drill, trimmer or blower and its batteries. For a new buyer, count the cost of a battery and charger before judging the cap.
Reviewers rank Ryobi as the most common value choice in this tier, and the brushless ONE+ HP saw is generally described as the upgrade for people who plan to use the saw more often. Ryobi also sells a newer second-generation PBLRS02B with the same stroke and speed, so check which version a seller lists.
Ryobi ONE+ HP Compact one-handed (PSBRS01B)
The maker lists 0-3,000 SPM, a 5/8 inch stroke, a weight of 3.8 lb and a length of 13 in., describing it as a compact one-handed saw. It has a pivoting shoe, a blade release lever and an LED. It comes with a 6 inch wood blade, is sold tool-only, and carries a three-year warranty.
The short stroke means slower cutting in thick material, but the small size is easier on the wrist and fits between joists and inside cabinets. This is the better choice for pruning, trimming PVC and cutting in tight spots than for tearing out framing.
SKIL PWR CORE 20 compact kit (RS582902)
The maker’s page for this kit lists a 1 inch stroke and up to 3,000 strokes per minute, with a pivoting adjustable shoe, tool-less blade change, variable-speed trigger and LED. The kit includes the saw, a 2.0 Ah battery, a charger, a wood-cutting blade and an Allen key, and retailers list about 4.6 lb. The motor is brushed. Reviewers call it a good budget option when a battery is needed because everything is in one box. Warranty terms differ between listings (one lists 1 year), so read the box.
The limits of a 2.0 Ah battery are runtime and sustained cutting. For a few pruning or demolition cuts it is adequate; for a day of tearing out a deck it would need a second battery.
SKIL PWR CORE 20 brushless (RS5884-1A)
The maker lists a brushless motor, a 1-1/8 inch stroke, a switch between linear and orbital modes, a rafter hook, a length of 17 in. and a weight of about 6.3 lb bare. The kit lists a 4.0 Ah battery and a PWR JUMP charger, and retailers describe a five-year limited warranty. Stroke is listed as 1-1/8 in. by most sources and 1 in. by a few. This is the sturdier of the two SKIL options, and its price differs by seller, so it may or may not fit under the cap.
Budget alternative: Craftsman V20 CMCS300B
Listings show the Craftsman V20 CMCS300B as a brushed bare tool with a 1 inch stroke, up to 3,000 rpm, about 3.6 lb, a 6 inch blade and a three-year limited warranty. Battery and charger are sold separately, so it suits someone already on the Craftsman V20 platform. Pro-brand saws from DeWalt, Makita and Bosch generally sit at or above this cap once a battery is added, so they are a step up rather than a fit.
What to look for
Stroke length and strokes per minute
Stroke length is how far the blade travels with each cycle. A 1-1/4 inch stroke cuts faster through thick stock than a 5/8 inch one. Strokes per minute describes speed, and most saws here top out around 3,000 to 3,200 SPM. Orbital action, where listed, pushes the blade forward on the upstroke for faster wood cutting but rougher cuts.
Brushless versus brushed
Brushless motors are described by the makers as more efficient with longer runtime, while brushed motors are cheaper. A brushed saw is fine for occasional jobs.
Blade choice
The blade matters as much as the saw. Wood blades have coarse teeth, metal blades have fine teeth, and pruning blades are designed for green wood. Use the blade the manual recommends for the material.
Weight and balance
The compact Ryobi at 3.8 lb and the SKIL brushless at about 6.3 lb differ by roughly two and a half pounds, which is noticeable on overhead cuts. One-handed saws also demand a firm second grip on the work when possible.
Safety notes
- Before cutting into walls, floors or ceilings, consider hidden wiring, water pipes and gas lines. If there is any doubt, stop and call a licensed electrician or plumber.
- Rest the shoe firmly against the material before pulling the trigger to limit kickback and vibration, and read the manual’s kickback and blade guidance.
- Wear eye and hearing protection, a dust mask where needed and gloves suited to the job. Metal cutting sends hot sparks and chips.
- Do not remove the blade or adjust the shoe with the battery installed. Cut away from the body and keep the blade clear of cords and hoses.
- Follow the manual for battery charging and storage.
Pick X if…
| If this describes the buyer | Choose | Why |
|---|---|---|
| Owns Ryobi batteries and wants power | Ryobi PBLRS01B | 1-1/4 in. stroke listed, brushless, tool only |
| Prunes, trims PVC, works in tight spots | Ryobi PSBRS01B | 13 in. long, 3.8 lb, one hand |
| Starts from zero and wants a kit | SKIL RS582902 | Battery, charger and blade included |
| Will cut a lot and can stretch the cap | SKIL RS5884-1A or the next tier | Brushless, longer stroke, orbital mode |
| Needs one saw once a year | Lowest-cost bare tool or a kit | Platform and storage matter more than speed |
Alternatives
- A jigsaw. For curves and finish cuts in wood, a jigsaw is the better tool.
- A hand pruning saw. For occasional branch cutting, a manual saw avoids the need for a battery.
- A higher tier. Several full-size brushless saws from pro brands sit just above this cap, which is worth considering if the saw will see heavy use.
Frequently Asked Questions
Is a reciprocating saw good for cutting wood to size?
Not for precision work. It is designed for rough cuts, demolition and pruning. For straight, clean cuts in boards, a circular saw or handsaw is more suitable, and a jigsaw handles curves.
Does a longer stroke matter?
Yes for thick material. A longer stroke clears chips and cuts faster, which is why the 1-1/4 inch stroke of the full-size Ryobi suits demolition better than the 5/8 inch stroke of the compact model.
Can the same saw cut metal and wood?
Yes, with the correct blade. Use fine-tooth blades for metal and coarse-tooth blades for wood. Follow the blade maker’s guidance, and expect slower cutting and more heat in metal.
Why does the saw jump or vibrate?
This usually happens when the shoe is not held against the material or the blade teeth are too coarse for the work. Press the shoe against the surface, start the cut with the saw running, and match the blade to the material.
Is a brushless saw worth it under this budget?
For occasional use a brushed kit is adequate. Brushless is worth considering if the saw will be used often and a bare tool fits an existing battery platform.
What should I do before cutting into a wall?
Assume there could be wiring, pipes or gas lines. Turn off the circuit if safe to do so, use a detector, and call a licensed professional if you cannot confirm what is behind the surface.
Keep reading
- Best Miter Saw under $150: Picks and What to Look For (2026)
- Best Jigsaw under $150: Picks and What to Look For (2026)
- Best Power Tool Set under $150: Picks and What to Look For (2026)
- Best Impact Driver under $100: Picks and What to Look For (2026)
- Best Orbital Sander under $100: Picks and What to Look For (2026)
- Best Drill Driver Combo under $100: Picks and What to Look For (2026)



